T5 Transmission Small Block Chevyweather Forecast - Gm did not put a t5 behind a 350 for a reason and the v6 trannys are wimpy at best. The early t5 was a pop can made to hold about 175 horsepower. It did it poorly. Only hard part is finding one that doesn't. A t5 manual transmission is a popular swap for these early chevy trucks. However, some folks think the camaro version of the. The t5 came behind the small blocks in the third gen camaros/firebird/etc, so anything with the old small block bellhousing bolt pattern it should bolt up to 4. 3, 305, 327,. Hey, i have a 1992 s10 2. 8l 5 spd tahoe, i believe that would mean it has the t5 tranny. Question is, can i swap out the old 2. 8 for an early 90's 350 tbi (around 210hp 300 ft/lbs) without the t5. The factory bellhousings were aluminum, but for added strength, use. In the camaro the trans is twisted about 15 degrees, no matter, bolt it to a standard 4spd bell housing straight up. I installed an astro manual t5 (available only on contractor vans) to the chevy 250 inline six since it is the only t5 that is a direct bolt up for the early chevy trucks. Right. hence the need for the 621 bellhousing,. 1983 to 1987 was the first design,. I have a 273 engine, a t5 chevy s10 transmission, and a 10. 5 pressure plate. One idea was to use this. Has anyone experienced using this combination? Std transmissions are rated at up to 265 lbโ ft (359 nโ m) of input torque with a 2. 95:1 first gear. I know the input shaft for s10 t5 is longer than a t5 that came on a small block, and that is has something like 13 or 14 splines (cant remember off the top of my head) compared to. Grab the trans, and go to a wrecking yard and snaggle a chevy v8 bell housing.
Gm did not put a t5 behind a 350 for a reason and the v6 trannys are wimpy at best. The early t5 was a pop can made to hold about 175 horsepower. It did it poorly. Only hard part is finding one that doesn't. A t5 manual transmission is a popular swap for these early chevy trucks.